Volvo V40 P31429510 Airbag ECU Crash Data Reset Service – MK2 2012–2019

£50.00

Postal service — customer module required

Check your module before ordering

Original electronic SRS module only; no airbags/inflators/pretensioners; exact label and supported reset confirmed.

Read the service information · Posting instructions

Send us your original module. This is a reset service—not a replacement airbag ECU.Professional UK postal crash data reset for compatible Volvo V40 MK2 SRS modules, including P31429510 / 31429510. Where technically supported, we reset stored crash/event data and return your module. Confirm compatibility from your complete module label before ordering.

10 in stock

SKU: GEM-V40-P31429510-RESET
Category: ,

Description

VOLVO V40 AIRBAG ECU CRASH DATA RESET SERVICE

UK-wide postal service · P31429510 / 31429510 · MK2 2012–2019 where fitted

Send us your original module.This is a repair/reset service. You are not purchasing the airbag module shown in the photographs.
Supported crash/event data reset on your existing ECU.

No donor module is required. The photographs are for identification/reference purposes only.

Service overview

GEM Electrical & Mechanical Repairs offers a professional crash data reset service for compatible Volvo V40 MK2 airbag/SRS control modules, including Volvo part number P31429510 / 31429510.

If your V40 has been involved in an accident and its SRS ECU has stored crash or deployment data, the original module may be suitable for resetting instead of replacement. Customers throughout the United Kingdom can post their original module to us for assessment and supported processing.

Compatible module and compatibility

For compatible Volvo V40 MK2, approximately 2012–2019, airbag/SRS control modules with Volvo part number 31429510 / P31429510. The supplied promotional reference is T160711170391; the clean module photograph shows T163211170743. These references must not be assumed interchangeable.

Compatibility must be confirmed from your actual module label, hardware and condition. Not every V40 built during these years uses this ECU. Compare your original identification with the product information and photographs, and send a clear photograph of the complete label before purchasing if unsure.

How it works

  1. Contact GEM to confirm compatibility or place your order.
  2. Have your original SRS/airbag ECU removed following manufacturer safety procedures.
  3. Package the electronic module in anti-static protection inside a strong, well-padded box.
  4. Include your order number, contact details, vehicle information and diagnostic fault codes. Send it to GEM Electrical & Mechanical Repairs using tracked postage and the delivery details provided for your order.
  5. We inspect the module, assess support and read/process its data where possible.
  6. We reset stored crash/deployment data where supported and appropriate, and carry out applicable bench checks.
  7. We securely return your original module using the applicable return-delivery service.
  8. Have the module reinstalled and all required vehicle diagnostic and SRS checks completed.

What you need to send

  • Your original electronic SRS/airbag ECU only
  • Your order number and contact details
  • Vehicle model/year, label reference and fault codes
  • Details of the collision and any previous module work

Service includes

  • Compatibility assessment
  • Supported crash/deployment data reset
  • Original data backup where applicable
  • Applicable bench checks and return of your own module

Before sending your module

Before removal, disconnect the vehicle battery and follow Volvo’s manufacturer safety procedures, including the specified waiting period. Have a suitably qualified technician remove and refit the SRS control module. Send only the electronic control module—not airbags, inflators or seat belt pretensioners.

Confirm delivery details for your order and use tracked postage. Do not send unrelated vehicle parts.

Turnaround

Fast processing where available. Ask for the current estimate before sending; timing depends on the module’s condition, support and workload. We will contact you before further action if the module cannot be processed safely.

Return delivery

You arrange and pay for inbound postage. The checkout return-shipment fee covers tracked return delivery, signature and packaging for parcels up to 2 kg. Review the available cover and final order total before purchasing.

Important information: repair the complete SRS system

Crash data reset addresses supported crash/event data stored in the module. It does not repair defective SRS components or guarantee that the airbag warning light will go out. Deployed or faulty airbags, seat belt pretensioners, impact sensors, damaged wiring, connector faults, occupancy sensors, low voltage, communication faults and other SRS diagnostic trouble codes require separate diagnosis and repair.

The vehicle must be correctly repaired after an accident before its airbag system is returned to service. After refitting, a qualified technician must perform the required diagnostic checks and any applicable coding, calibration or manufacturer procedures. Bench processing cannot verify the complete in-vehicle SRS system.

This service does not include

  • A replacement airbag ECU or donor-module cloning
  • Repair of water, fire, corrosion, PCB or connector damage
  • Repair of external SRS components or unrelated fault codes
  • Vehicle diagnosis, removal/refitting, coding or calibration

Terms and service limitations

This listing is for a crash data reset service performed on your original airbag/SRS control module. The photographed module is not supplied. A successful reset does not prove that every internal circuit or the complete vehicle SRS system is fault-free.

Our service terms and refund and returns policy apply. No additional warranty or guaranteed warning-light cure is promised by this listing.

Frequently asked questions

Am I buying an airbag ECU?

No. This is a reset service on your original module. The photographed module is for identification/reference only; no replacement ECU is supplied.

Will this clear every Volvo V40 airbag warning?

No. A supported reset removes stored crash/event data only. Remaining component, wiring, sensor, voltage or communication faults must be diagnosed and repaired separately.

Can I send my module from anywhere in the UK?

Yes. We accept postal enquiries and orders from England, Scotland, Wales and Northern Ireland. Confirm your module identification and the delivery details before posting.

Can the original ECU be reused?

It may be reusable if it is electronically operational, compatible and suitable for the supported reset procedure. Physical damage or unsupported hardware may require a different solution.

What happens if my module cannot be reset?

We will contact you before taking further action if the module is unsupported or cannot be processed safely. The applicable service and return terms apply; a successful reset is not guaranteed.

Related information

See the Volvo V40 airbag crash data reset service and Volvo P31429510 reset guide. For other modules, browse airbag ECU and SRS module services or SRS ECU cloning and data transfer.

Purchase and postal next steps

  1. Confirm that your module and required work match this service. Agree the scope with GEM before payment when compatibility or repair requirements are uncertain.
  2. Purchase the agreed service and keep your order number.
  3. Package only the module(s) specified above. Enclose your order number, contact details, vehicle details and fault information.
  4. Follow the packing and posting instructions and confirm the delivery details for your order before dispatch.
  5. GEM performs the supported, agreed work and returns the supplied module(s) according to the applicable order process.

This is a service on your supplied electronics. No replacement module is included. Read about UK-wide postal services.

Related service information

Check Compatibility Before Ordering

Need help? Chat on WhatsApp